View B84143A0090R105_4771330.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMC filters
3-line filters
for converters and power electronics
Rated current 8 to 150 A
Series/Type: Date: B84143A*R105 January 2006
EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet and the information contained therein without EPCOS' prior express consent is prohibited.
3-line filters for converters and power electronics
Power line filters for 3-phase systems Rated voltage 520/300 V AC, 50/60 Hz Rated current 8 to 150 A Construction
3-line filter Metal case Book size
B84143A*R105
Features

Excellent price/performance ratio
Ultra-compact design
Low weight
Easy to install
Optimized for long motor cables and operation
under full load ENEC10, UL and cUL approval Applications
Frequency converters for motor drives, e.g.
- elevators - pumps - traction systems - HVAC systems (heating, ventilation and air conditioning) Power supplies Terminals
Finger-safe terminal blocks
Marking Marking on component: Manufacturer's logo, ordering code, rated voltage, rated current, rated temperature, climatic category, date code Minimum marking on packaging: Manufacturer's logo, ordering code
Please read Cautions and warnings and
Important notes at the end of this document.
2
01/06
3-line filters for converters and power electronics
Typical circuit diagram
LINE LOAD
L1' L2' L3'
B84143A*R105
L1
L2 L3
SSB1965-K
Technical data and measuring conditions Rated voltage VR Rated current IR Test voltage Vtest Overload capability (thermal) Leakage current Ileak Climatic category (IEC 60068-1) Approvals 520/300 V AC, 50/60 Hz Referred to 40 C ambient temperature 2236 V DC, 2 s (line/line) 2720 V DC, 2 s (lines/case) 1.5 * IR for 3 min per hour or 2.5 * IR for 30 s per hour At 520 V AC, 50 Hz 25/100/21 (-25 C/+100 C/21 days damp heat test) EN 133200, UL 1283, CSA C22.2 No.8
Please read Cautions and warnings and
Important notes at the end of this document.
3
01/06
3-line filters for converters and power electronics
Characteristics and ordering codes VR AC V 520/300 IR A 8 16 25 36 50 66 90 120 150 Ileak Terminal cross section mA mm2 4 4 4 10 10 16 35 35 50 13 15 15 15 15 16 18 18 18 Rtyp m 16 9 5 4 2 1.5 1.1 0.90 0.55 Approx. Ordering code weight kg 0.58 0.90 1.10 1.75 1.75 2.7 4.2 4.9 5.3
B84143A*R105
Approvals
B84143A0008R105 x B84143A0016R105 x B84143A0025R105 x B84143A0036R105 x B84143A0050R105 x B84143A0066R105 x B84143A0090R105 x B84143A0120R105 x B84143A0150R105 x
x x x x x x x x x
x x x x x x x x x
x = approval granted
Please read Cautions and warnings and
Important notes at the end of this document.
4
01/06
3-line filters for converters and power electronics
Dimensional drawings B84143A0008R105 (8 A)
133.7 PE M4 x 11 8
B84143A*R105
63 380.3
L1 L2 L3 Marking LINE LOAD 1550.5 165
SSB2151-6-E
L1' L2' L3'
51.4
B84143A0016R105 (16 A)
199.5 PE M5 x 15
9
4.5
1.5
Terminal blocks 4 mm 2 Tightening torque 0.5 ... 0.6 Nm
70 380.3
L1 L2 L3
50
Terminal blocks 4 mm 2 Tightening torque 0.5 ... 0.6 Nm
SSB2152-E-E
Marking LINE 2210.5 231 LOAD
L1' L2' L3'
Please read Cautions and warnings and
Important notes at the end of this document.
46.4
4.5
1.5
5
01/06
60
3-line filters for converters and power electronics
B84143A0025R105 (25 A)
199.5 PE M5 x 15 9
B84143A*R105
83
380.3
L1 L2 L3
46.4
Marking LINE 2210.5 231 LOAD
L1' L2' L3'
4.5
1.5
Terminal blocks 4 mm 2 Tightening torque 0.5 ... 0.6 Nm
SSB2153-M-E
B84143A0036R105, B84143A0050R105 (36 and 50 A)
200 PE M6 x 24 8
90
60
Terminal blocks 10 mm 2 Tightening torque 1.2 ... 1.5 Nm
SSB2154-V-E
58 350.3
L1 L2 L3
Marking LINE 2550.5 265 LOAD
L1' L2' L3'
Please read Cautions and warnings and
Important notes at the end of this document.
6
4.5
1.5
01/06
70
3-line filters for converters and power electronics
B84143A0066R105 (66 A)
200 PE M6 x 24 8
B84143A*R105
141.5 350.3
L1 L2 L3
58
Marking LINE 2550.5 265 LOAD
L1' L2' L3'
4.5
1.5
Terminal blocks 16 mm 2 Tightening torque 1.5 ... 1.8 Nm
SSB2155-4-E
B84143A0090R105 (90 A)
240 25 13 80
135
120
100
1.5
46 L1 L2 L3 L1' L2' L3'
600.3
6.5
Marking LINE LOAD 2550.5 290
Terminal blocks 35 mm 2 Tightening torque 3.2 ... 3.7 Nm
SSB2156-C-E
Please read Cautions and warnings and
Important notes at the end of this document.
7
01/06
63
PE M10 x 34
3-line filters for converters and power electronics
B84143A0120R105 (120 A)
240
25
13
B84143A*R105
90
150
PE M10 x 34
100
1.5
46
L1 L2 L3
Marking LINE LOAD
L1' L2' L3'
6.5
650.3
2550.5 290
Terminal blocks 35 mm 2 Tightening torque 3.2 ... 3.7 Nm
SSB2157-K-E
B84143A0150R105 (150 A)
326 240 90 70.8
54
86
150
PE M10 x 34
L3
L3'
2550.5 270
Terminal blocks 50 mm 2 Tightening torque 6 ... 8 Nm
SSB2158-T-E
Please read Cautions and warnings and
Important notes at the end of this document.
8
01/06
6.5
L2
Marking LINE LOAD
L2'
650.3
L1
L1'
1.5
60
63
3-line filters for converters and power electronics
Insertion loss (typical values at Z = 50 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 8 A
100 dB 80
SSB2137-6
B84143A*R105
Filters for 16 A
B84143A0008R105
100 dB 80
SSB2138-E
60
60
40
40
20
20
04 10
10
5
10
6
10
7
Hz 10 f
8
B84143A0016R105 04 10 5 10 6 10
10 7
Hz 10 8 f
Filters for 25 A
100 dB B84143A0025R105 80
SSB2139-M
Filters for 36 A
100 dB B84143A0036R105 80
SSB2140-Q
60
60
40
40
20
20
04 10
10 5
10 6
10 7
Hz 10 8 f
04 10
10 5
10 6
10 7
Hz 10 8 f
Please read Cautions and warnings and
Important notes at the end of this document.
9
01/06
3-line filters for converters and power electronics
Insertion loss (typical values at Z = 50 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 50 A
100 dB B84143A0050R105 80
SSB2141-Y
B84143A*R105
Filters for 66 A
100 dB B84143A0066R105 80
SSB2027-S
60
60
40
40
20
20
04 10
10 5
10 6
10 7
Hz 10 8 f
04 10
10 5
10 6
10 7 Hz 10 8 f
Filters for 90 A
100 dB 80
SSB2028-1
Filters for 120 A
100 dB 80
SSB2029-9
B84143A0090R105
B84143A0120R105
60
60
40
40
20
20
04 10
10 5
10 6
10 7 Hz 10 8 f
04 10
10 5
10 6
10 7 Hz 10 8 f
Please read Cautions and warnings and
Important notes at the end of this document.
10
01/06
3-line filters for converters and power electronics
Insertion loss (typical values at Z = 50 ) unsymmetrical, adjacent branches terminated common mode, all branches in parallel (asymmetrical) differential mode (symmetrical) Filters for 150 A
100 dB 80
SSB2030-C
B84143A*R105
B84143A0150R105
60
40
20
04 10
10 5
10 6
10 7 Hz 10 8 f
Please read Cautions and warnings and
Important notes at the end of this document.
11
01/06
EMC filters Cautions and warnings
Important information Please read all safety and warning notes carefully before installing the EMC filter and putting it into operation (see ). The same applies to the warning signs on the filter. Please ensure that the signs are not removed nor their legibility impaired by external influences. Death, serious bodily injury and substantial material damage to equipment may occur if the appro priate safety measures are not carried out or the warnings in the text are not observed. Using according to the terms The EMC filters may be used only for their intended application within the specified values in low voltage networks in compliance with the instructions given in the data sheets and the data book. The conditions at the place of application must comply with all specifications for the filter used. Warnings
It shall be ensured that only qualified persons (electricity specialists) are engaged on work such

as planning, assembly, installation, operation, repair and maintenance. They must be provided with the corresponding documentation. Danger of electric shock. EMC filters contain components that store an electric charge. Danger ous voltages can continue to exist at the filter terminals for longer than five minutes even after the power has been switched off. The protective earth connections shall be the first to be made when the EMC filter is installed and the last to be disconnected. Depending on the magnitude of the leakage currents, the particular specifications for making the protective-earth connection must be observed. Impermissible overloading of the EMC filter, such as impermissible voltages at higher frequen cies that may cause resonances etc. can lead to destruction of the filter housing. EMC filters must be protected in the application against impermissible exceeding of the rated currents by suitable overcurrent protective.
12
01/06
EMC filters Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, EPCOS-Jones, Baoke, CeraDiode, CSSP, MLSC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
13
01/06

▲Up To Search▲

Price & Availability of B84143A0090R105

	To Download B84143A0090R105 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .